Channels & engagement
Outbound campaigns & dialler
Proactive contact that is productive, compliant and kind to customers – outbound voice, SMS and email campaigns on Genesys Cloud CX, designed and tuned by certified specialists.
The Genesys Cloud outbound dialler lets your contact centre reach customers proactively by voice, SMS, email and WhatsApp from the same platform that handles inbound work. QVCCS designs and builds outbound campaigns end to end: choosing the right dialling mode, structuring contact lists, configuring do-not-contact lists, call and digital rule sets and contactable times, and tuning call analysis response sets. Certified specialists from our own bench make sure every campaign is productive for agents, respectful to customers, traced to your compliance requirements and proven with safe numbers before the first live dial.
- Solution Architect
- Senior Business Consultant / Business Analyst
- IT Systems, Telecoms & SIP Engineer
- Senior Developer
- Systems Integration Tester
- The right dialling modePreview, progressive, power, predictive or agentless – matched to each campaign's purpose, list size and risk profile.
- Compliance designed inDo-not-contact lists and contactable time rules help keep calls and messages within your regulatory and consent obligations.
- Voice, SMS, email and WhatsAppDigital campaigns send SMS, email and WhatsApp alongside voice, so customers hear from you on the channel that suits them.
- Lists that stay cleanContact lists, call and digital rule sets and wrap-up outcomes designed so every attempt updates the record and informs the next.
- 01Contact listImported or API-fed records
- 02Compliance filtersDo-not-contact, time rules
- 03Dialling modePreview to predictive
- 04Call analysisResponse set: live or machine
- 05Agent or messageConnect, SMS or email
- 06Outcome recordedWrap-up rules and codes
Each attempt is filtered for compliance, analysed, connected and recorded.
01
What a Genesys Cloud outbound dialler delivers
Outbound contact is often where the contact centre creates value rather than absorbs demand: collecting overdue payments, confirming appointments, renewing policies, following up quotes, or warning customers about a problem before they call. A Genesys Cloud outbound dialler brings that work onto the same platform as inbound service, so the same agents, queues, scripts, recordings and reporting serve both directions. Agents can be blended between inbound and outbound work, supervisors manage everything from one place, and customer history follows the person rather than the system they happened to be contacted from.
Done badly, outbound annoys customers, wastes agent time and creates regulatory exposure. Done well, it feels like good service. The difference lies in the design: which customers are contacted, on which channel, at what time, how often, and what happens after each attempt. QVCCS approaches every outbound programme from that angle. Our consultants work with your operations, compliance and data teams to define the purpose of each campaign and the customer experience it should create, before deciding how the dialler should be configured to deliver it.
02
Dialling modes, lists and messaging campaigns
Genesys Cloud outbound supports preview, progressive, power, predictive and agentless dialling modes, plus digital campaigns. Preview presents the record before the agent chooses to call, optionally with a countdown timer or agent-owned records, and suits complex or sensitive conversations. Progressive dials one contact per available agent, performing call analysis before connecting, power dials several numbers for each idle agent, adjusting pace against a configured abandonment threshold, and predictive dials before agents become free, which Genesys recommends only with at least 15 agents. Agentless campaigns use no agents or scripts: the call analysis response set decides what happens to live parties and answering machines, and can transfer a live party to an outbound flow, which may in turn route to a queue. The right mode is chosen per campaign, not per contact centre.
Campaigns draw on contact lists, which can be imported or kept current through the Platform API. Call rule sets are evaluated before a call is placed, for example to set caller ID, block a number or switch to preview, and after it ends, to update contact columns or append the number to a do-not-contact list; digital rule sets do the same for messages. Call analysis distinguishes live voice from answering machines and other results so each can be handled appropriately. SMS, email and WhatsApp campaigns run from the same platform, so a reminder text or follow-up email sits alongside voice under the same lists and controls. QVCCS designs how these pieces combine for each campaign rather than applying one template to every list.
The best outbound campaign feels like service to the customer: the right message, on the right channel, at a sensible time.
03
Compliance, pacing and the details that matter
Compliance is the first design constraint, not an afterthought. Do-not-contact lists and contactable time sets support compliance by suppressing numbers and addresses that must not be contacted and restricting attempts to permitted hours in the contact's own time zone. Consent, frequency limits, abandoned call thresholds and caller identification vary by country and industry, and they change; for UK campaigns, Genesys publishes guidance on configuring outbound for Ofcom's persistent misuse policy. QVCCS does not provide legal advice, but our consultants translate the requirements your compliance team sets into concrete configuration, trace each one in the RTM, and document exactly how every rule is enforced so it can be audited.
Pacing is where productivity and customer experience meet. Predictive dialling on a small list, or an aggressive abandon setting, can leave customers answering to silence. Answering machine detection that is tuned too tightly misclassifies live people; too loosely, it wastes agent time on voicemail. Our architects choose modes and settings per campaign, plan time-zone and retry strategies, and design caller identification and voicemail behaviour so customers recognise and trust the call. We then review results from early dialling and adjust settings before scaling up.
Data is the other half of the job. Contact lists need consistent phone number formats, time-zone information and the fields agents and scripts depend on, and the outcomes of every attempt need to flow back to your CRM or collections system. We design list structures, import and refresh processes, wrap-up codes and outbound scripts together, and build the data actions or API integrations that keep source systems current. The result is a campaign that learns from every attempt instead of calling the same wrong number repeatedly.
04
How the QVCCS squad delivers outbound campaigns
Outbound combines dialling science, telephony, data integration and regulation, so QVCCS musters its outbound team from its own bench and takes collective responsibility for every campaign it puts live. A Senior Business Consultant / Business Analyst leads campaign discovery: purpose, audiences, channels, volumes and the compliance rules your team sets. A Solution Architect owns the design for modes, list schemas, rule sets, contactable times and call analysis. An IT Systems, Telecoms & SIP Engineer matters more here than on most inbound work, validating caller ID presentation, carrier behaviour and outbound routes, while a Senior Developer builds campaigns, outbound flows, data actions and list automation with your data and CRM owners. A Systems Integration Tester proves every suppression and retry rule.
Every compliance rule in the requirements specification is traced in a Requirements Traceability Matrix to the configuration that enforces it and the test that proves it. The HLD and LLD build book document campaigns, rule sets, call analysis response sets, scripts and wrap-up codes, and Interface Control Documents define list imports and CRM write-back. Build follows the LLD under four-eyes peer review. Testing starts with safe numbers and controlled lists, never live customers: the SIT pack verifies suppression, time-zone handling, retries, call analysis outcomes and write-back, and negative testing covers bad numbers, missing time zones and failed imports. A pilot with a small list and agent group is our go/no-go gate, and supervisors receive training and campaign runbooks before scale-up.
05
Running and optimising outbound over time
Outbound performance changes with list quality, time of day, season and regulation, so campaigns need continuous attention. The early warning signs are usually in the data: right-party contact rates falling on a list that has not been refreshed, abandonment creeping up as agent numbers change, or answering machine outcomes drifting after a carrier change. We review contact rates, abandonment, right-party contacts and outcomes with your team, assess Genesys outbound releases in our release readiness review, and recommend changes to pacing, timing and channel mix. Support follows your Genesys Cloud CX support model, alongside your provider or under SLA with us. New use cases, such as proactive service notifications or WhatsApp campaigns, go through the same compliance-first design.
What you get from QVCCS
- Campaign discovery and dialling mode recommendation per use case
- Contact list schema, import ICD and CRM write-back design
- Do-not-contact, contactable time and call and digital rule set configuration
- Call analysis response sets, caller ID and voicemail behaviour tuned
- SMS, email and WhatsApp campaigns alongside voice
- RTM-traced SIT evidence, pilot results and campaign runbooks
- Support aligned to your model, plus managed campaign administration
Genesys documentation references
- Dialing modeshelp.genesys.cloud
- About outbound dialinghelp.genesys.cloud
- Rule management overviewhelp.genesys.cloud
- Create a WhatsApp campaignhelp.genesys.cloud
- Create a contactable time sethelp.genesys.cloud
- Create a new internal DNC listhelp.genesys.cloud
- Genesys Cloud and Ofcom compliancehelp.genesys.cloud
Methods & templates
Outbound campaigns & dialler: the methods and templates we use
Every QVCCS engagement follows our seven-stage delivery lifecycle, each stage closed by a quality gate. For Outbound campaigns & dialler, the work concentrates in Discover, Define, Design, Prove and Run & evolve, and these are the techniques and standard templates we lean on there, each one traceable from requirement to design, build, test and support.
- 01DiscoverDiscovery sign-off
- 02DefineRequirements baseline
- 03DesignDesign authority review
- 04BuildBuild complete
- 05ProveGo / no-go readiness
- 06TransitionOperational acceptance
- 07Run & evolveService reviews
Discovery workshops and stakeholder mapping
Agrees each campaign's purpose, audience, channels, volumes and owners, and who in compliance signs off the rules.
Requirements Traceability Matrix (RTM)
Links every consent, time-zone, frequency and abandonment rule to the configuration that enforces it and the test that proves it.
Interface Control Document (ICD)
Defines contact list imports, API updates and outcome write-back to your CRM or collections system, field by field.
SIT test pack and negative testing
Proves suppression, contactable times, retries, call analysis and write-back with safe numbers, including bad and missing data.
Go / no-go readiness
Uses a controlled pilot with a small list and agent group as the gate before any campaign scales up.
Optimisation reviews against KPIs
Reviews contact rates, abandonment and right-party contacts to tune pacing, timing and channel mix.
How we deliver
Outbound campaigns & dialler: your engagement at a glance
- 01Define campaignsAgree purpose, audience, channel, volume, agents and compliance rules for every outbound use case.
- 02Design the diallerDocument modes, lists, rule sets, contactable times, call analysis, scripts and integrations in detailed designs.
- 03Build & integrateCertified developers configure campaigns, flows, scripts, data actions and list automation with your data owners.
- 04Pilot safelyTest with safe numbers, then pilot with a small list and agent group before scaling up.
- 05Tune & supportReview pacing and outcomes, adjust settings, and support you alongside your provider or through managed campaign services.
- Solution Architect
- Senior Business Consultant / Business Analyst
- IT Systems, Telecoms & SIP Engineer
- Senior Developer
- Systems Integration Tester
Every engagement follows our seven-stage method, with design authority, engineering standards and four-eyes peer review behind it. How we deliver →
In practice
Where we have delivered this
A UK healthcare services provider: live on Genesys Cloud first, then delivery self-service
How QVCCS took a UK healthcare services provider live on Genesys Cloud CX while its APIs were late, then added self-service that checks and books deliveries.
- Users
- About 55, including an outsourced partner's agents
- Licence
- Genesys Cloud CX 3
A UK field services company: from kickoff to live on Genesys Cloud in 13 weeks
How QVCCS took a UK field services company's 315 agents, 89 service numbers and 113 queues from kickoff to live on Genesys Cloud CX in 13 weeks.
- Users
- 315 agents
- Licence
- Genesys Cloud CX 3
A global flexible workspace provider: getting a real-time dialler back to real time
How QVCCS guided a global flexible workspace provider to restore real-time follow-up in its Genesys Cloud CX dialler, deeply integrated with Dynamics 365.
- Users
- 200+
- Licence
- Genesys Cloud CX 3
Questions
Outbound campaigns & dialler: common questions
Which dialling modes does Genesys Cloud support?
Genesys Cloud outbound supports preview, progressive, power, predictive and agentless dialling modes, plus SMS, email and WhatsApp campaigns. Each mode balances agent productivity, pacing and customer experience differently. QVCCS recommends a mode for each campaign based on its purpose, list size, agent numbers and compliance obligations, and tunes it after pilot results.
How does Genesys Cloud help with outbound dialling compliance?
Do-not-contact lists suppress numbers and addresses that must not be contacted, and contactable time sets restrict attempts to permitted hours in the contact's time zone, with call rule sets adding pre-call and wrap-up logic. Your compliance team sets the requirements; our consultants turn them into configuration, trace and test it, and document how each rule is enforced for audit.
Can Genesys Cloud send SMS, email and WhatsApp.
Yes. Digital campaigns send SMS, email and WhatsApp messages from the same platform as voice campaigns, using contact lists, digital rule sets and do-not-contact controls. We design message content, timing and channel mix with you, and connect responses back into your contact centre or CRM where needed.
Can agents handle inbound and outbound work together?
Yes. Agents can be blended so they take inbound interactions and outbound campaign calls according to demand. QVCCS designs the blend, queue priorities and utilisation so inbound service levels are protected while outbound work progresses whenever agents have capacity.
Last reviewed